Archive | March, 2012

Dip Dye Cupcake Liners

26 Mar

first few attempts

We’re having a little Easter party with some of the girls from work this week and I’m so excited! We have a little after-work get together every few months, the excuse for us to meet up and laugh – and have a drink or two – varies (past gatherings have included pumpkin carving and a cookie exchange) but one thing that remains the same is that we all bring something yummy for the group to enjoy. Since Easter is arguably the prettiest holiday – so many pastels! – we thought we would try to make this the prettiest party yet.

I am really loving the ombre trend currently (well, at least I’m assuming it’s a trend… I feel I see it everywhere lately) so I thought it would be fun to try and make some ombre pastel cupcake liners to match the ombre cupcakes I’m planning on bringing to the party. I scoured the internet for a DIY, but sadly to no avail, so I had to make it up myself… a daunting prospect.

The cupcake liners didn’t soak up the dye like I thought they would, so they ended up being more dip dye than ombre… but despite not turning out quite as planned, I am definitely pleased with the results. I know I’m a bit biased, but I think they turned out really well. They’re prettier than plain white cupcake liners, but far less expensive than the printed ones that are available.

all finished

What you’ll need:

- white cupcake liners

- food colouring (I used red, blue and green)

- water

- bowls for mixing the dye in that are wide enough on the bottom to fit the top of a cupcake liner

- newspaper or an old sheet to protect the surface you’re working on (it can get messy)

It’s pretty simple actually, all you have to do is mix the food colouring in a bowl with some water (use more water for lighter shades) and then dip the top of the cupcake liner in it. I tried dying the bottom of the liner and it didn’t work so well, but perhaps you’re more talented than me and can pull it off. Also, as I mentioned the cupcake liners don’t soak up the dye very quickly, and since I’m rather impatient I ended up just swishing them around in the dye so the process would go much faster. Swishing them around means that the colour at the top won’t be even, but I kind of like it that way.

After you’ve put the liners in the dye mixture, there will be some excess on them (as you can see above). You can either just wait it out and it will dry eventually, making the colour a bit darker… or you can gently tap the liners on the edge of the bowl to shake off the excess dye. Just make sure you have something underneath, because as you can see below, it can get a bit messy.

The colours I chose to do were pink, purple and seafoam. Mixing up all the colours brought me back to elementary school – it was fun! 

Pink was just red dye and water; Purple was a mixture of blue and red (though I think I might have accidentally used more blue than red); Seafoam was a mixture of blue and green (think it was pretty equal that time).

Terrarium DIY

14 Mar

As I mentioned before, I made a lot of goals for 2012… a lot. However my main goal is to make 2012 my most creative and craftiest year yet, a goal which includes only making the presents I give people this year – not just for Christmas, all year. A rather lofty goal that, admittedly, I didn’t really consider in detail  before fully committing myself to… but I’ve never been one to back down from a challenge, so here we go! (wish me luck)

My sister was up first. She’s not the easiest person to buy (or in this case, make) for, but nor is she the hardest – so luckily, a good person to start with. She recently moved in to a new apartment and had mentioned that it didn’t really feel very ‘homey’ yet… and what’s a better housewarming present than a plant? Answer: a terrarium!

The finished product

I have been admiring terrariums on pinterest (yes, pinterest strikes again) and in one of my favourite books for project inspiration Design*Sponge at Home, so I was happy to get the opportunity to make one! Although, as it seems with all DIY projects that I undertake these days, it was not as straightforward as I thought it would be… sigh.

In theory, it’s pretty simple; all you need is a big glass container, some small rocks or gravel, charcoal, potting soil and plants. Here’s a little diagram I did to show you the order they go in…

See, seems pretty straightforward right?

Don’t worry, it is. There are just a few things to keep in mind…

Tips

* don’t use beach rocks – I had this brilliant idea that I was going to embrace the west coast and use rocks from a local Vancouver beach. I spent at least an hour picking out interesting rocks and carefully considering how they would go together and look in the container. I was all excited… until my mom pointed out that the salt from the seawater drenched rocks would kill the plants. Oh. Crap. Luckily, she pointed out that I could boil the rocks to rid them the salt. Not that it did me any good…

* don’t use rocks that are too big – after boiling the rocks, I realized that they were too big. They took up too much space in the terrarium and the charcoal fell through the spaces between rocks to the bottom of the container. The rocks I used were still perhaps a bit big because as you can see above, some of the charcoal still managed to make it’s way down the sides. I’m guessing a way to solve this would be to use gravel or, as the Design*Sponge book recommended, small broken shells. I kind of prefer the pebbles, so I’m willing to overlook a bit of charcoal sneaking down the sides.

don’t buy plants that are too big – an empty container seems much bigger than when it is actually filled with rocks and soil. So do yourself a favour and measure your container (height and width) before you buy your plants. It would also be a good idea to take a little tape measurer with you when you go to buy the plants – this way you can arrange them as you’d like to plant them and see if it will work before you spend money on non-returnable plants. I didn’t do this and ended up buying plants that when planted together were way to big for the container. I ended up only buying one new plant and using the asparagus fern, even though it stuck out a bit over the top of the container, because it was just so cute!

the plants

In the end, the plants I ended up using were the asparagus fern (the tall guy there at the back), the polkadot plant (the pink and green one) and a plant I can’t remember the name of (oops!) but it’s one that will spread out and grow to cover the dirt. Different levels and textures make your terrarium more interesting.

There are lots of different kinds of terrariums you can make, along with different plants, containers and decorations you can use to make the terrarium your own unique little indoor garden. One thing I really want to tackle soon is a succulent terrarium. It’s a bit different than the one I made, but here is a great post I found about how to make one from the BirdHouse Blog. I’m not going to pretend to be an expert on the varieties of terrariums, so consider this blog post a jumping off point -

However, a few more things I can tell right now  you are:

*choose plants with similar light, moisture and environmental needs – succulents and cacti won’t mesh too well with ferns, ivy or other plants that like more moisture. Also, succulents and cacti need more sandy soil.

* don’t place your terrarium in direct sunlight – it will burn your little plants! If you have a closed terrarium (which, by the way, apparently don’t need watering) direct sunlight will overheat and kill your plants. Terrariums definitely need light (photosynthesis and all that jazz) but a general rule they do best when the light is diffused or filtered. Design*Sponge at Home recommends leaving a newly planted terrarium in the shade for about a week and then adjusting the light according to the plants’ requirements. (note to self: share this fact with sister)

* plants should continue to be scaled to the size of the container – even after you’ve picked out the perfect plants you still have to work to prevent overcrowding. This includes: pruning back plants as they grow bigger, clipping and removing dead leaves, and if need be, removing those plants that just won’t stay in check and become too big.

* add some decoration! Pretty stones, moss, pinecones, sticks… or a cute little deer!

a baby deer!

I also put a little baby deer (or fawn as some might say) in amongst the foliage, since you can never have too much cuteness right? Unfortunately I wasn’t able to buy the deer in time to take pictures of the terrarium with it – thank goodness for instagram though!  It also allowed me to snap a triumphant picture of the terrarium just as I finished it (a very proud moment – especially after the overly large rocks and plants debacle!)

You can see all my instagram photos here if you like :)

newly completed!

Have you made a terrarium before or are you hoping to make one soon? I’d love to hear your experiences, so please feel free to share!

Dream Home

8 Mar

I came across these photos yesterday on one of my newest and most favourite blog discoveries dustjacket attic (check it out, it’s beautiful!). As soon as saw this Country Style Australia spread I immediately fell in love… pretty sure I even gasped aloud. Naturally, I then did what any other web savvy girl would do these days; I  pinned the pictures to my ‘Dream Home‘ board on pinterest.

I mean, beautiful floral patterns, whimsical vintage pieces and gorgeous fresh flowers… what’s not to love?!

It struck me as funny that I have this board on pinterest called ‘dream home that’s full of pictures of all these amazing interiors, but as I was pinning these my first thought was ‘no, but for real guys, this is my dream home. No joke.’ So naturally I had to share on my blog as well. Stylist Lara Hutton and photographer Anson Smart did an incredible job… it made my heart hurt I love it so much :)

If you like, you can follow the rest of my pinterest boards here

Follow

Get every new post delivered to your Inbox.

Join 106 other followers